Technical parameter
Application |
It is a turbine diversion centrifugal negative pressure pump. It can extract liquids in the vacuum tank under negative pressure 0.09MPa |
Specification | 1T-500T, 0.75KW-75KW |
Material |
SUS304, SUS316L (In the selection of materials, all parts that contact the materials such as pump body,pump cover and impeller are made of SUS316L or SUS304 stainless steel.) |
Standards | DIN, SMS |
Impeller | Split Impeller and semi-split impeller |
Working condition |
The sanitary negative pressure pump adopts horizontal conveying with high and Iow liquid levels. It has certain suction |
Surface Treatment |
The liquid receiving part is subject to polishing treatment and other parts matte or sandblasting treatment |
Maximum inlet pressure | 0.5MPa |
Temperature range | -10℃ to+140℃(EPDM) |
Washable mechanical seal |
Water pressure: Max. 0.1MPa Water volume: 0.25-0.5L/min |
Motor
1、Depending on the configuration, the pump mainly adopts “ABB” brand high-efficiency M2BAX three-phase AC motor. The pump is designed and manufactured according to IEC60034.IE60072, conforming to CE marking requirements.
2、The explosion-proof motor is available to meet the needs in different applications.
3、With excellent electric performance, low noise and low vibration, the motor is designed to have standard protection grade of IP55 and insulation grade of grade F.
4、Frequency: 50Hz/60Hz
5、Waking made: continuous (SI)
6、Rotation speed: The standard rotation speed of the pump is 2900r/min.
YUY-F series performance and model selection table
Model descriptions of YUY sanitary negative pressure pump
For Example
- 2018-01-15
- 2018-01-15